Pacific Microsystems
 
 
 
 
Insulation Tester
 
 
Send Enquiry

Insulation Tester \ MegOhmmeter with Test Voltage Programmable up to 5kVDC

The Insulation tester \ MegOhmmeter HT7051 was designed to perform professional insulation resistance measurements with test voltage programmable up to 5kVDC and wide measurement range up to 10Tohm which permits a large applications for each industrial LV environment ( test on electrical machines, power transformers, electrical cables, switchboard panels, generic devices, etc…). Three different function modes are available on meter: FIX mode ( fixed test voltage ), ADJUST mode ( programmable test voltage ) and RAMP mode ( programmable test voltage and duration time with up to 3 kind of selectable ramps ) which permits to reach correct results in each situation. The Polarization Index ( P.I ) and Dielectric Absorption Ratio ( D.A.R ) available features are duration tests which permits to define a good behaviour of the global insulation. The Insulation tester \ MegOhmmeter HT7051 is powered by a NiMH rechargeable battery with integrated adapter which permits to reach great performances during the measurements, it have a internal memory for saving results and a RS-232 interface for connection to PC and transfer saved measurements. All structure is fitted in a portable hard carrying case which assure safety typical of a “on field” Insulation tester \ MegOhmmeter


Function
 

•  Insulation resistance measurement with test voltage up to 5kVDC
•  Measurement range up to 10Tohm
•  FIX mode with test voltage of 100, 250, 500, 1k, 2.5k e 5kVDC
•  ADJUST mode with test voltage selectable from 100 to 5kVDC
•  RAMP mode with selectable duration time and test voltage
•  Selection of 3 type of ramp test
•  Polarization Index ( P.I. ) measurement
•  Dielectric Absorption Ratio ( D.A.R ) measurement
•  DC / AC TRMS voltage up to 600V
•  SMOOTH feature for stable measurement results
•  GUARD test lead for surface leakage current compensation
•  MX, MIN limit selectable threshold on measurements
•  Automatic discharging of device under test
•  Fuse protection on power supply
•  LCD display with backlight and bargraph
•  Internal memory for saving results
•  Recall saved results at display
•  RS-232 interface for PC connection
•  Rechargeable internal battery



Accessories

Standard
• KIT14000 : Set 3 cables with alligator clips + 2 cables
• C7001 : Power cord
• BORSA2000N : Carrying bag for accessories
• TOPVIEW : Windows software + serial cable C232NG1
• ISO9000 calibration certificate
• User manual

Optional
• C2009 : RS-232/USB adapter


Standards
• EMC 2004/108/CE Directive
• 16th edition
• CE MARK
• IEC/EN61187
• IEC/EN61557-1
• IEC/EN61557-2
• LVD 2006/95/CE Directive

 
 
Alarm Annunciators  I  Sequence of Event Recorders  I  RTV Silicone Rubber Coatings  I  Insulator Upgrading Systems  I  Silicone Rubber Coating  I
SF6 Gas Vaccuming and Refilling  I  SF6 Gas Reclamation Units  I  SF6 Gas Leak Detectors  I  SF6 Gas Dew Point Hygrometers  I  Insulator Shed Extender  I
Anti Flashover Coating  I  PLC Based Mimic Panel  I  Microprocessor Based Controller I  Microprocessor / PLC Based Automation Systems  | Advanced Total On-line Monitoring System for GIS
| Portable GIS Partial Discharge Diagnosis System | Advanced Total Online Monitoring System for MCSG | Ultra | Linear Heat Detection | Opto Electronics Unit | Optical Fiber Sensors | Services |
Sensa Partner Program   I  Insulation Tester or MegOhmmeter
 I  Earth Ground Resistance Tester  I  Power Quality Analyzer  I  Thermal Imagers - IR Cameras  I  Two Pole Voltage Testers  I  Laser Distance Meters  I
Sound Level Meters   I  Pipes and Cable Localizers  I  No Contact Voltage Detectors  I  Digital Thermometers  I  AC / DC TRMS Current Clamp Meters  I  Digital TRMS Multimeters  I  Solar Power Meters  I  Portable Digital Sun Irradiance Meters
Home  I  Contact Us  I  Certificates  I  Photo Gallery  I  Clients  I  Sitemap  I  Enquiry